When we first viewd our new home, the garden that accent the front and sides of the house as well as the perimeter of the back yard appeared lush. When we moved in, we quickly realized thistles were quite problematic in most of the garden beds. The plantings were ecclectic, and too much. Once again we resigned ourselves to ripping out the gardens and starting fresh with the look we wanted.
Showing posts with label DIY. Show all posts
Showing posts with label DIY. Show all posts
Saturday, June 30, 2012
Tuesday, February 15, 2011
Plant Cage
The last couple of days have been on the mild side very much welcomed from the previous week of cold temperatures and blizzard conditions. My husband was at Home Hardware to pick up more salt for the driveway. He brought home the spring edition of Home at Home, an idea magazine put out by Home Hardware. There's always great ideas in the magazine as well as instructions on how to complete the
Sunday, December 26, 2010
Constructing a Garden Pond
All garden pools regardless of their size are constructed pretty much the same way. You can use a rigid, pre-formed black pond liner or black pond liner however if you want to save a bit of money you can use a pre-formed kiddy pool. Ideally the pond should be at least 3 feet deep at its deepest but if over wintering fish the pond should be deeper. The pond excavation site should be leveled
Tuesday, July 27, 2010
A little bit of woodworking a little bit of home repair and One heck of a view
This past weekend I had the opportunity to do some work for a friend. This friend has a house on a lake that needed some repair work done to a couple of exterior doors. After many years of weather some of the wood finally started rotting.
First of all this was my view at 7:30am Saturday morning……
I have to tell you it doesn’t get much better than this. I have always been a lake guy even though I have never spent a ton of time on them and I love boats, so this view pretty much made my day. I had to keep reminding myself that I am there to work not watch the boats go by. So anyway… To the work part of this…..
Take a look at the shots of the rot --
This is one of the doors. This one was the difficult one. The one that scared me, the one that had me thinking for a few minutes what the heck did I get myself into, however after stepping back cooler heads prevailed.
This one looks pretty bad but it was actually really easy to fix, so lets start here.
This is on a single open French door so this is the bulkhead between the door that opens and the static window/door. The first thing we did was figure out how to separate the rotted board from the rest of the door or if we would have to build a patch. We were able to find the seam and start to separate the bulkhead.
A little prying and she came right off. You have to make sure not to pry to hard and damage the other side of the door. Just take your time and go slowly.
I trimmed a board that was the same width of the bulkhead. I just used a miter saw to cut it to size.
I attached the board using some finish nails. I set the nails just below the surface and filled them with some caulk. Make sure to use an exterior caulk. One the board was attached I also ran a bead of caulk down the inside edge where the wood meets the door to seal any gaps, I did the same where the board meets the other part of the bulkhead. One area that you want to make sure you get some caulk into is at the location of the original rot, make sure you get plenty of caulk at the bottom of the board between the board and the metal transition plate. That way if there is ever any standing water it keeps the water from soaking into the wood as much as possible.
This is how that door turned out. I painted the entire door frame and doors, in addition to the new wood that was installed.
Now onto the scary door…..
So you saw the rot from above. I made some assumptions about the construction of the door that turned out not to be totally correct.
******* If my friend is reading this post please just skip this section. This totally isn’t your house… *************
Once I started the demolition of the rotted area it became apparent that the door was not built as we thought. Instead of being multiple pieces the door was a single piece or it was glued together so well that we would have destroyed the entire door trying to go the original route of removing the rotted piece. Instead of being able to just pry the piece off like the other door I ended up having to cut this section out. There was more rotted wood than what you could see with the eye so I cut a little bigger than the rotted wood so to make sure there was no bad wood left.
To cut this section out I used a great new tool from Dremel tools, called the Dremel Trio this was a super handy little tool.
From this point I started rebuilding the frame. I used several pieces of wood to build up the thickness we needed to fill the gap.
Once I had the right thickness I was able to start test fitting the piece in the hole and fine tuning everything.
Here is what the section looked like after I got the piece built up, at this point I caulked the heck out of everything to make sure it was sealed up tightly.
After Painting caulking and painting some more here is what the door looks like now. What rotted wood and hole are you talking about. I don’t remember any rotted wood or a large gaping hole in the door.
So here is the whole area all cleaned up and doors repaired and repainted. I think it turned out pretty well.
I know it looked scary at first but keep in mind there are very few things that cannot be fixed and usually they are pretty simple once you step back and take a look and think things through.
Have a Great Day!
Wednesday, May 12, 2010
Woodworking Wednesday’s – Show off your projects
Welcome to the 4th Woodworking Wednesday. It has been a while since I did one of these and thought it was time to do another one and also had a request for it as well so what better time.
I hope you will take the time to add your project to the list.
Grab the button link from the textbox.
Have a Great Day!Here are the Rules:
1. Select any project that you created using any type of woodworking. If you cut, beat, sanded or just did something with wood consider that woodworking.
2. Add a link of you post to the party – This is a link to the actual post not the main page of your blog.
3. Give a description of your project so everyone knows what you are featuring.
4. Grab the button above and add a link to this party so that your readers can join in on the fun.
Monday, April 5, 2010
Milk Lamp
When I went to the Antique festival this weekend I found a great old milk bottle. I knew exactly what I wanted to do when I saw it.
I went to Lowes and bought a light kit, a glass bit.
After about 30 minutes of drilling, sweating and freaking out. I finally got the hole in the back of the bottle and ran the wire and wired up the rest of the lamp. A few things of note here when you are drilling the glass take it nice and slow and use plenty of water while drilling. This lubricates the bit and allows you to drill cleanly, make sure to use a low rpm on the drill so that you don’t over heat the glass and crack it.
We have not totally decided about the Styrofoam in the bottle. We are going to give it a few days to see if we want to stay with that or find something else to fill the bottle with, maybe some bottle caps or something similar.
I think I might go back to the next show and pick up another one of these and use them for our nightstands in the bedroom. We will see what happens.
Have a Great Day!
Subscribe to:
Posts (Atom)
